TheoLt Release 10 is GO!

Watch this space for full details of the updates, the improvements and how-to’s !

Existing users should contact us now for update details.

TheoLt, TheoLt Contour and TheoLt Tools now improve the productivity of BricsCAD to V17 and AutoCAD to Release 2017 for anyone using Total Station, Laser Distance Meters or Laser Scan Data for the productions of plans or elevations.

TheoLt R9.0

We are pleased to announce the launch of TheoLt Release 9.0

For this release our core aim has been to Streamline the Product Structure, User Interface and Settings. This is a release that has been a very long time coming but is one in which we are very proud and we believe offers a base to develop the survey tools much further than before.

A brief outline of the update follows with each module to be further detailed in posts over the coming days.

Core (Comm’s module) Updates:

  • Vastly improved User Interface with “Orientation Wizard”.
  • Pro: Un-occupied stations may now adjusted in Network via “data-augmentation”.
  • Increased instrument library matching the latest offerings.
  • Consistent Settings across ALL modules (Core, ARX’s, Contour & Office).
R9.0 Screenshot - Control.

R9.0 Screenshot - Control.

CAD Tools (ARX) Updates:

  • Support for BricsCAD V10 to V15 (including 32 and 64 bit where appropriate).
  • Support for AutoCAD 2007 to 2014 (including 32 and 64 bit where appropriate) .
  • New streamlined and consistent command set.
  • Vastly Improved features library with far more power and customisation than before.
  • theoDoor and theoDoorAlt commands allow 2 types of doors to be configured and access from the toolbars.
  • New improved Icons.
  • Improved Menus and menu loading (with Arx auto-load).
  • Consistent Settings across ALL modules (Core, ARX’s, Contour & Office)
    TheoLt Settings & Toolbars

    TheoLt Settings & Toolbars

Contour Updates:

  • Contour now included in all versions.
  • Contour settings and mesh now persist through save and loading of drawing file.
  • Multiple mesh (TIN’s) per drawing now instead of just the one.
  • New improved Icons.
  • Consistent Settings across ALL modules (Core, ARX’s, Contour & Office).
TheoLt Contour Toolbar

TheoLt Contour Toolbar

Office Updates :

  • Added, import of “level” files (gridded heights such as Nextmap).
  • “Non-Pro” version with no Network Adjustment serving as a Survey Data translator for CAD
  • Apply default coding to all points in a text data file.
  • Network adjustment updated to match Core.
  • Calculate Mesh and contour lines from points marked as “contour points” (via code list).
  • Export Mesh and contours to CAD (faster workflow).
  • More consistent zoom and pan.
  • Consistent Settings across ALL modules (Core, ARX’s, Contour & Office).
TheoLt / Office GSI File view

TheoLt / Office GSI File view

If you have any questions or would like to discuss these updates, please do not hesitate to contact us: sales@theolt.com .

What is the difference beteween Leica’s Disto to CAD tool and DistToPlan?

The Leica DISTO transfer has been available now for a while on both AutoCAD and BricsCAD.

With the advent of the new cheaper Bluetooth Distos (3aBT) which includes this free tool I would expect far more surveyors to be investigating the transfer of measurements direct to CAD whilst on site.

So, what is the difference between this free tool and DistToPlan (which of course is not free)? I will compare like with like. The Leica tool is only a communication agent so I will compare this with the DistToPlan agent.

Configuration:

DistToPlan works with any Bluetooth driver by default. All that is required is to select the virtual com port ( ports 1 to 8 ) and connection will be established. With the Leica system, if the the bluetooth driver is neither the Broadcom or Microsoft drivers an additional configuration program must be run to allow  manual connection to be established. If the correct drivers are installed the Leica software will automatically find the Disto.

The DistToPlan agent is an external EXE, selecting the settings enables the CAD Platform to be selected (AutoCAD, Bricscad or InteliCAD). In addition DistToPlan my be customised to send the measurements to almost any Windows application. Only AutoCAD® versions from 2004 and BricsCAD® versions from 9.3.5 are supported by the Leica PlugIn.

In Use:

The Leica system allows customisation of the Disto device such as units remotely which DistToPlan does not.

Both applications transfer the measurements direct from the Disto to the CAD command line as if they were typed. The main difference is that DistToPlan also stores the previous measurements (and angles, see below), meaning that the command in CAD need not be active as you measure, it is possible to measure the room and then sit at the laptop picking the correct dimensions for each line.

With the 2nd fn key pressed on on the Disto, both systems allow the angle of the line to be controlled from the Disto whilst measuring.

One further function that does not seem to be offered by the Lecia software is remote trigger. If you wish to use the Disto on a pole for example, DistToPlan is able to trigger a measurement remotely.

The extent of the Leica software is simply data transfer. DistToPlan adds a full set of commands to the CAD system to enable construction of building plans far quicker than just utilising the basic CAD commands. Examples of this may be seen here…

DistToPlan may be downloaded here…

DistToPlan: Tools for building survey.

For quite a while now the Disto© has been the weapon of choice for surveyors doing 2D building plans, it has the huge advantage of being a one handed tool that replicates, in part at least, the familiar actions of ‘hand measurement’ viz, rod tape and dimensioned sketch. The big problem with the Disto© is that it doesn’t really automate the measured drawing process.

So simply put the Disto© problem is: ‘how do you get from measurement to drawing?’

We kissed our drawing boards goodbye a long time ago and in doing so started a process of making manual practices fit into CAD workflows. This has been an awkward at best but we can’t ignore the fact that CAD is the most important communication tool for measured graphic information today.

LatimerCAD Ltd has developed DistToPlan http://www.disttoplan.co.uk/ in conjunction with kubit Gmbh to bridge the gap between device and drawing.

Unlike almost any other surveying sensor, the Disto© generates data with no direction or position information. It is quite possible to use the ‘raw’ Disto© data to plot lines in CAD but this involves a great deal of  detailed command line entry to gain positional control of every distance measured. DistToPlan provides the necessary human interface with the drawing by automating as much as possible the geometry alignment procedures that are second nature in drawing board practice. Working with Disto became a lot easier with the advent of the Bluetooth interface which meant the surveyor doesn’t need 3 arms to operate CAD, Disto© and drawing together.

Having evolved over the last 5 years through extensive field trials and comprehensive commercial  testing a 4 method toolset has emerged which adresses the needs of the majority of measured survey practitioners. The final development strategy encompasses the 4 main methods surveyors use to produce plans:

1. Follow the wall – Where a line is plotted by fixed directions (up, down, left, right)  to enclose a perimeter and then brace with diagonals as a check.

2. Triangulation- The plan is determined by the intersects of arcs from a base, each base in turn linked by pairs of arcs.

3. Build up from boxes – Using the simplest plan form and then adapting it to conform to the measurements. ( In the manner of using squared paper to rule up the drawing)

4. Sketch & Measure – A freeform sketch is prepared and then scaled to fit.

DistToPlan will work in any one of these methods by placing the measurements into CAD when cued by the apropriate stage of the chosen method.

Let’s look at a number of common situations where DisToPlan works with the surveyors chosen strategy for measurement and CAD plotting:

Scenario 1: the plan is square and the scale requirement is relaxed (1:100 ‘outline’ survey) and there is a need to build up a building plan quickly.

By using the ‘Rectangular Room’ command the Disto measument is handled as follows, note that the 2 requests for the diagonal  have been ignored with an ‘enter’ stroke:

And the correctly scaled rectangle is placed in CAD. The next room is measured in the same way and placed by using a wall thickness offset:

The room is placed and the alignment point and direction selected:

Once you are happy with the align pint and direction bring the new room into line with the 1st one:

Click to select and the wall offset prompt lets you put in the wall thickness:

So using the rectangle room command we can build up a basic plan very quickly. Now we all know just how rare a rectangualr room plan is! So the next step is to develop the rectangle using the ‘square feature’ tool:

The measurments are sent to the command line at the appropriate prompts and the side of the wall the feature is placed is selected by a pick in the graphics area:

This is the ‘build up from boxes tool’. The room outlines can be aligned in any state but its probabaly best to get the edits for each room done in turn to make the alignments easier. How features are added is shown in Scenario 3 below.

Scenario 2 : The room has a complicated plan and the surveyor wants to be sure of the perimeter shape before measuring, the survey needs ‘free hand’ drawing in AutoCAD.

DistToPlan now has a unique Sketch & Measure tool which will allow a sketch plan to be measured and scaled after drawing. Here’s one way of using it:

Zoom scale to 10x (assuming you are starting from scratch)

This will get your aproximate drawing size close to ‘actual size’.

Select the Sketch & Measure tool and note the custom cursor view: you are now working in an automatically grouped line set with a nominal snap running; the comstraints on placing the line can be adjusted in the sketch panel which pops up on use of the command. The grid and snap weighting are controlled by the pop up panel.

The panel should be kept open throughout preparation of  the sketch as you may need to reset the grid step to get the sketch right. The grid value is reset by a click in the graphics area. Sketch out the plan with the ‘rubber band’ line. The sketch is not just a simple line, DistToPlan stores the lines as a group ready for interrogation by  measurement.

Once you are happy with the sketch the perimeter line is finished with a ‘close’ option from the right click context menu ( or ‘C’ in the command line)  the measure panel will open and measurement can begin. Measurements are added for each line, in any order,  on selection the command line prompts for the distance and also relays the CAD distance  as a rough check.

Missing ties can be added to the plan and measured in with the Add Brace option on the panel. For error distribution DistToPlan needs to have 2 fixed points in the plan and these can be identified at this stage with the Fix Pt option.

The measured lines are anotated with the distances entered at the command line, the  selected line for measurement is highlit with a custom pointer:

The direction of the pointer indicates the end of the line that will be adjusted as well as the direction of the anotation text.

Choosing the  fixed points  (or line): To work, the distributed error maths needs 2 fixed points. For best results the should be located on a long wall opposite the closing point. (At the present release, if fixed points are chosen at the start /close of the loop things can go awry).

On completion of the measure sequence selection of the  finish option on the Measure panel runs an error distribution routine (theofitclosed) and, if the figure is within toloerance, it will be adjusted by least squares to close the perimeter. The shift caused by the adjustment is recorded in the drawing by the plot of the node positions (green and blue by default) before and after adjustmet in apropriate layers.

A report is generated and sent to the command line showing the condition of the adjustment.

If needed,  the room can be treated as part of the building plan, at any stage after measurement and the adjustment done at a later time.

Scenario 3 : A FM plan is needed with full anotation of services by use of standardised symbol libraries. To keep track of the operations needed in each room to be measured.

DistToPlan offfers a ‘strategy’ template on the tool pallette. Eash command set needed is prompted by picking off the step on the pallette.

DistToPlan is supplied with a pallette menu which is used to perform 2 key functions.

1.To give acess to the symbol libraries and

2 To control the organisation of the measured data for grouping ( by room, floor plate etc.) so that, if desired, network adjustment by total station can be applied.

The basic plan can be built up using the apropriate measuring tool (e.g the ‘square room’ and align commands used in scenario 1) .

The anotations are added for floor and room height using the prompt from the pallette. Site notes can be added using the add note tool which will attach a reference of a Journal note file or image to the DWG for easy acess to additional information collected by bluetooth camera or site sketches. DistoToPlan will send the new files and prompt to insert them into the project / drawing.

In addition DistToPlan logs the Disto data in a time stamped data file which can be used for either drawing recovery or QA, stores the room geometry for room by room network adjustment if required and supplies a customisable attributed block library for direct DWG insertion.

For full heighting, corner closing and 3D work with a total station TheoLt Building Survey Suite is recomended.

About DistToPlan DistToPlan is available forAutoCAD (full and LT) versions as well as (with some reduced functionality) the AutoCAD alternative BricsCAD from v10 on.

Disto© is a registered trademark of Leica Geosystems Gmbh.

DistoPlan is a registered trademark of LatimerCAD and kubit Gmbh.

TheoLt is a registered trademark of Latimer CAD and English Heritage

AutoCAD is a registered mark of Autodesk Inc.

BricsCAD is a registered mark of Bricsys nv